This is a 7.9 gallon plastic fermenter complete with lid, airlock, and spigot. These buckets are made from Polypropylene (PP).
- 7.9 gallon plastic bucket
- Plastic lid with hole and grommet
- 3-piece airlock
- Spigot with 3/8" barb
NOTE: The bucket, lid, airlock, and spigot are packed separately and are not assembled.
Please note: some customers have noted in the reviews that when the spigot is fully threaded in, the barbed end will be below the bottom of the bucket, which may require the bucket to be placed on a countertop or other raised surface, or angle the spigot to not point directly downward when not in use.
Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. We recommend using a 5/8" drill bit and taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place.